User's Manual

20
Description of transmitter
Description of transmitter
Transmitter controls
Aerial with folding / rotating base
Rotary proportional control CTRL 7
3-position switch SW 4/5
2-position momentary
switch SW 1
Left-hand stick
Tr im
ON / OFF switch
Left-hand four-way button
LCD screen
Right-hand four-way button
Tr im
Right-hand stick
2-position switch SW 3
Carry handle
Neckstrap lug
Attaching the transmitter neckstrap
You will fi nd a strap lug mounted in the centre of the
front face of the mx-12 HoTT transmitter, as shown in
the drawing on the right. This lug is positioned in such a
way that the transmitter is perfectly balanced even when
suspended from a neckstrap.
Order No. 1121 Neckstrap, 20 mm wide
Order No. 70 Neckstrap, 30 mm wide
3-possition switch SW 6/7
Rotary proportional control CTRL 8
Important note:
In the transmitter’s standard form any servos connected
to the receiver can initially only be operated using the
dual-axis sticks. For maximum fl exibility, all the other
transmitter controls (CTRL 7 … 8, SW 1, 3 … 7) are
“free” in software terms, and can be assigned to any
channels you like, enabling you to set up the system to
suit your personal preference or the requirements of a
particular model. This is carried out in the “contr set.”
menu, as described on pages 74 (fi xed-wing models)
and 76 (model helicopters).
Central Status LED
33112_mx12_HoTT_2_GB.indd Abs6:2033112_mx12_HoTT_2_GB.indd Abs6:20 06.06.2011 19:39:3106.06.2011 19:39:31