User's Manual

44
Fixed-wing models: receiver assignment
As there are several possible combinations of servo
or
ientation and control surface linkage, you may fi nd that
the direction of rotation of one or more servos is incor-
rect. Use the following table to solve the problem.
Model
type
Servo rotating in
wrong direction
Remedy
V-tail Rudder and elevator
reversed
Reverse servos 3 + 4 in
the “servo set.” menu
Rudder correct,
elevator reversed
Swap over servos 3 + 4
at the receiver
Elevator correct,
rudder reversed
Reverse servos 3 + 4 in
the “servo set.” menu,
AND swap over at the
receiver
Delta,
fl ying
wing
Elevator and ailerons
reversed
Reverse servos 2 + 3 in
the “servo set.” menu
Elevator correct,
ailerons reversed
Reverse servos 2 + 3 in
the “servo set.” menu,
AND swap over at the
receiver
Ailerons correct,
elevator reversed
Swap over servos 2 + 3
at the receiver
All menus which are relevant to fi xed-wing models are
marked with an “aeroplane” symbol in the “Program
descriptions”:
This means that you can easily skip irrelevant menus
when programming a fi xed-wing model aircraft.
33112_mx12_HoTT_2_GB.indd Abs17:4433112_mx12_HoTT_2_GB.indd Abs17:44 06.06.2011 19:39:3606.06.2011 19:39:36