User's Manual

Program description: reserving a new memory

sticks, whereas servos connected to sockets 5 and 6

remain steadfastl

y at their centre position. If you set

up a new model helicopter, servo 6 may also respond to

some extent to the controls - depending on the position

of the throttle limiter CTRL 7. For both model types this

situation only changes once you have carried out the

appropriate assignments in the “Transmitter control

settings” menu.

If you wish to use a newly initialised model memory,

then this MUST ﬁ rst be “bound” to a (further) receiver

before any servos connected to the receiver can be con-

trolled from the transmitter. For more information on this

please refer to the “Binding” section on pages 61 and 70.

You will ﬁ nd a description of the basic steps for program-

ming a ﬁ xed-wing model aircraft in the Programming

Examples section starting on page 144; for model

helicopters the equivalent section starts on page 166.

The following menu descriptions are arranged in the

order that they are listed in the individual menus in the

multi-function list.

33112_mx12_HoTT_2_GB.indd Abs21:5033112_mx12_HoTT_2_GB.indd Abs21:50 06.06.2011 19:39:3706.06.2011 19:39:37