User's Manual

54
Program description: model memories
copied to the SD card.
Notes:
If the warning …•
SD-CARD
INSERT
OK
… appears instead of a model selection, there is no
SD card in the card slot;
see page 22.
When you copy a model memory, the binding data is •
copied along with the model data, so that the receiv-
ing system associated with the original model mem-
ory can also be operated using the SAME transmitter
and the copied memory without repeating the bind-
ing procedure.
An exported fi xed-wing model is stored on the memo-•
ry card under \\Models\mx-12 with the format “aMod-
elname.mdl” and a model helicopter with the format
“hModelname.mdl”. However, if you export a “name-
less” model, then you will fi nd its data stored on the
memory card under “a-” and “hNoName.mdl”.
Since the • mx-12 HoTT does not feature a real-time
clock, the model data are stored on the memory card
with a fi xed creation date. However, if you wish to
change the date manually, you can do so on the PC
using a suitable program.
Some of the special characters used in certain mod-•
el names cannot be accepted due to specifi c limita-
tions of the FAT or FAT32 fi le system used by memo-
ry cards. During the copy process they are replaced
by a tilde (~) character.
If the memory card already contains a model fi le of •
the same name, it will be overwritten without warning.
Import from SD
Use the arrow buttons cd of the left or right-hand four-
way button to select the “Import from SD” sub-menu,
then briefl y press the SET button.
select model
clear model
copy mod–>mod
=>
=>
=>
=>
=>
export to SD
import from SD
=>
=>
Use the arrow buttons cd of the left or r
ight-hand four-
way button to select the model to be imported from the
SD memory card:
05
¿¿
frei
¿¿
EXTRA
ALPINA
COBRA
BELL47G
import from SD-CARD:
00/01/01
00/01/01
00/01/01
00/01/01
Notes:
The e
xport date displayed to the right of the model •
name is shown in the format “Year/Month/Day”.
Since the mx-12 HoTT does not feature a real-time •
clock, the model data are stored on the memory card
with a fi xed creation date. However, if you wish to
change the date manually, you can do so on the PC
using a suitable program.
When you do this, and briefl y press the SET button of
the r
ight-hand four-way button again, an “Import to mod-
el:” window is displayed. Use the arrow buttons cd of
the left or right-hand four-way button to select the target
memory, confi rm your choice with SET, or press ESC
to interrupt the process. An occupied memory can be
overwritten:
01
03
04
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
import to model :
05
¿¿
free
¿¿
E06
E06
E06
–––
When you confi rm the selected model memory by
pressing the SET button, the following security query is
displa
yed:
model
ULTIMATE
import ?
NO
YES
01
03
¿¿
free
¿¿
You can interrupt the process with NO; if you do this, you
are returned to the starting screen. However, if you use
the f button to select YES, and confi rm your choice
by pressing the SET button, then the selected model is
imported into the selected model memory.
Notes:
If the warning …•
SD-CARD
INSERT
OK
… appears instead of a model selection, there is no
SD card in the card slot;
see page 22.
When you import a model memory, the binding data •
33112_mx12_HoTT_2_GB.indd Abs23:5433112_mx12_HoTT_2_GB.indd Abs23:54 06.06.2011 19:39:3706.06.2011 19:39:37