User's Manual

52
Program description: model memories
The section on pages 24 and 25 explains the basic
method of using the buttons, while the previous two
double-pages explains how to move to the Multi-function
list and reserve a new model memory. At this point we
wish to start with the “normal” description of the indi-
vidual menu points in the sequence in which they occur
on the transmitter itself. For this reason we start with the
menu …
Model memory
mod.mem.
servo set.
D/R expo
wing mixer
base sett.
contr set.
phase trim
free mixer
servo disp basic sett
fail-safe telemetry
The transmitter can store up to twenty complete sets
of model data, including the digital trim values set b
y
the four trim levers. The trims are automatically stored,
which means that the settings you have carefully estab-
lished through test-fl ying are never lost when you swap
models. A pictogram of the selected model type, and - if
you have entered a model name in the “Basic settings”
menu (pages 56 and 64) - the name appears in all three
sub-menus of the “Model memory” menu following the
model number.
If necessary, use the arrow buttons of the left or right-
hand touch-key to select the “Model memory” menu,
then briefl y touch the SET button of the right-hand
touch-key:
Model memories
Calling up a model, erasing a model, copying model ¼ model
clear model
select model
clear model
copy mod–>mod
=>
=>
=>
=>
export to SD
import from SD
=>
=>
Use the arrow buttons cd of the left or right-hand
touch-ke
y to select the “clear model” sub-menu, then
touch the SET button.
Select the model to be erased using the arrow buttons
cd of the left or right-hand touch-key, …
01
03
04
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
model to be cleared:
R08
R08
R08
–––
… then touch the SET button again; the program re-
sponds with the security query:
model
GRAUBELE
to be erased ?
NO
YES
01
If you answer NO, the process is interrupted, and you
are returned to the previous screen page. If you answer
YES with the f button of the left or right-hand touch-
key and confi rm your choice with the SET button, then
the selected model memory is erased.
select model
select model
clear model
copy mod–>mod
=>
=>
=>
export to SD
import from SD
=>
=>
=>
If you now briefl y press the SET button again, you move
to the “Call up model” sub-men
u:
01
03
04
05
¿¿
free
¿¿
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
06
¿¿
free
¿¿
R08
R08
R08
–––
Now use the arrow buttons cd of the left or right-hand
touch-ke
y to select from the list the model memory you
wish to use, and confi rm your selection by pressing the
SET button. Pressing ESC takes you back to the previ-
ous menu page without switching models.
Notes:
If the warning message “Throttle too high” appears •
when you switch models, the throttle or collective
pitch stick (Ch 1), or the throttle limiter, is positioned
too far towards full-throttle.
If the battery voltage is too low, it may not be possible •
to switch model memories for safety reasons. In this
case the screen displays the following message:
not possible now
voltage too low