User's Manual
Table Of Contents
- Programming Manual 33116.mx-16 HoTT.1.gb
- Contents
- Safety Notes
- Safety notes and handling instructions relating to Nickel-Metal-Hydride rechargeable batteries
- Introduction
- Operating Notes
- Description of transmitter
- Using for the first time ...
- Installation Notes
- Definition of terms
- Assigning switches and control switches
- Digital trims
- “Binding” transmitter and receiver
- What is a mixer?
- General notes regarding freely programmable mixers
- Fixed-wing model aircraft
- Receiver socket assignment for "normal" models
- Receiver socket assignment for models of the “Delta / Flying wing” type
- “Binding” transmitter and receiver
- Detailed description of programming
- mx-16 HoTT programming techniques
- Model helicopters
- Receiver socket assignment
- “Binding” transmitter and receiver
- Detailed description of programming
- Programming example
- Appendix
- Guarantee certifi cate
53
Program description: model memories
select the target memory using the arrow buttons cd
of the left or right-hand touch-key, and confi rm your
choice with SET. Alternatively you can interrupt the
process with ESC. It is possible to overwrite a model
memory which already contains model data.
01
03
04
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
copy to model:
05
¿¿
free
¿¿
R08
R08
R08
–––
When you confi rm the selected model memory by touch-
ing the SET button, the security query appears:
model
ULTIMATE
to be copied ?
NO
YES
01
03
¿¿
free
¿¿
Selecting NO interrupts the process, and returns you to
the previous page. If you select YES with the f button,
and confi rm your choice by touching the SET button,
then the selected model is copied into the chosen target
model memory.
Note:
When you copy a model memory, the binding data is
copied together with the model data, so that a receiving
system bound to the original model memory can also
be operated with the copy of the memory, i. e. it does not
require another binding process.
Caution:
The erasure process is irrevocable. All data in the
selected model memory is reset to the factory
default settings.
Note:
If you wish to erase the currently active model memory
in the basic display, you will be required to defi ne the
model type “Helicopter” or “Fixed-wing” immediately.
However, if you erase a non-active model memory, then
the message “
ÄÄfreeÄÄ” appears in the Model select
menu.
copy model ¼ model
Use the arrow buttons cd of the left or right-hand
touch-key to select the “copy model ¼ model” sub-
menu, then touch the SET button.
select model
clear model
copy mod–>mod
=>
=>
=>
=>
export to SD
import from SD
=>
=>
Select the model to be copied using the arrow buttons
cd of the left or right-hand touch-ke
y …
01
03
04
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
copy from model:
R08
R08
R08
–––
… then briefl y press the SET button of the right-hand
touch-key in the
“Copy to model” window. You can now
Export to SD
Use the arrow buttons cd of the left or right-hand
touch-key to select the “Export to SD” sub-menu, then
touch the SET button.
select model
clear model
copy mod–>mod
=>
=>
=>
=>
=>
export to SD
import from SD
=>
=>
Use the arrow buttons cd of the left or right-hand
touch-ke
y to select the model to be exported:
01
03
04
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
export to SD-CARD:
R08
R08
R08
–––
When you confi rm the selected model memory with a
brief press of the SET b
utton, this security query ap-
pears:
model
ULTIMATE
export ?
NO
YES
01
SD-CARD
You can interrupt the process with NO; if you do this,
you are returned to the starting screen. However, if you
select YES with the f button, and confi rm your choice
by touching the SET button, then the selected model is