User's Manual

131
Program description: Telemetry menu
hand touch-key to open the selected sub-menu:
VOLT:
MODELTIME:
BATTERYTIME:
RUNTIME:
STOPWATCH:
TIME:
In this menu you can select and de-select the chosen
speech output after using the arrow buttons cd of the
left or right-hand touch-key to select the desired line,
followed by a brief press of the central
SET button of the
right-hand touch-key:
VOLT:
MODELTIME:
BATTERYTIME:
RUNTIME:
STOPWATCH:
TIME:
RECEIVER
Select the desired menu line with the arrow buttons
cd of the left or right-hand touch-key …
VOICE TRIGGER
REPEAT 1SEC
TRIG
TRANSFER
RECEIVER
3
9
… then touch the central SET button of the right-hand
touch-key to call up the selected sub-menu:
TEMP:
STRENGTH:
VOLT:
LOWVOLT:
In this menu you can select and de-select the chosen
speech output after using the arrow buttons cd of the
left or right-hand touch-key to select the desired line,
followed by a brief press of the central
SET button of the
right-hand touch-key:
TEMP:
STRENGTH:
VOLT:
LOWVOLT:
SENSOR
This line only appears if you have already activated one
of the “RX …” sub-menus of the “SIMPLE DATA VIEW”
menu, and then returned directly to the “VOICE TRIG-
GER” menu:
VOICE TRIGGER
REPEAT 1SEC
TRIG
TRANSFER
RECEIVER
3
9
SENSOR
For example, if you selected the “RX + VARIO” option,
then selected the “SENSOR” line and touched the cen-
tral
SET button of the right-hand touch-key, you will see
the display shown below:
ALT :
MAXALT :
MINALT :
As described in the left-hand column, you can also
select or de-select any available speech output by briefl y
pressing the central
SET button of the right-hand touch-
key after you have selected the desired line.