User's Manual

Program description: reserving a new memory

max. 8 remain steadfastly at their centre position. If

you set up a new model helicopter, servo 6 may also re-

spond to some extent to the controls - depending on the

position of the throttle limiter CTRL 6. For both model

types this situation only changes once you have carried

out the appropriate assignments in the “Transmitter

control settings” menu.

If you wish to use a newly initialised model memory,

then this MUST ﬁ rst be “bound” to a (further) receiver

before any servos connected to the receiver can be con-

trolled from the transmitter. For more information on this

please refer to the “Binding” section on pages 61 and 70.

You will ﬁ nd a description of the basic steps for program-

ming a ﬁ xed-wing model aircraft in the Programming

Examples section starting on page 142; for model

helicopters the equivalent section starts on page 164.

The following menu descriptions are arranged in the

order that they are listed in the individual menus in the

multi-function list.