User's Manual

56
Program description: base settings - fi xed-wing model
Base settings
Basic model-specifi c settings for fi xed-wing model aircraft
Before you start programming specifi c parameters,
some basic settings must be entered which apply only
to the currently active model memory. Select the “Basic
settings” (basic model settings) menu using the arrow
buttons of the left or right-hand touch-key, then touch the
central SET button of the right-hand touch-key:
mod.mem.
servo set.
D/R expo
wing mixer
base sett.
contr set.
phase trim
free mixer
servo disp basic sett
fail-safe telemetry
model name
mod name
stick mode
CH8 delay
motor on C1
1
yes
no
tail type normal
Touch the SET button of the right-hand touch-key to
move to the next screen page, where you can select
characters to assemble the model name. You can enter
up to nine characters to defi ne a model name:
0123456789
PQRSTUVWXYZ
model name
?
:
;
ABCDEFGHIJKLMNO
GRAUB
Use the arrow buttons of the left-hand touch-key to se-
lect the desired character, then move to the next position
in the name by touching one of the arrow buttons ef
of the right-hand touch-key, or its central
SET button.
Simultaneously pressing thecd or ef buttons of the
right-hand touch-key (CLEAR) inserts a space at that
point.
You can move to any character position within the input
fi eld using the ef buttons of the right-hand touch-key.
Touching the central
ESC button of the left-hand touch-
k
ey returns you to the previous menu page.
The model name entered in this way appears in the
basic display, and also in the sub-menus of the “Model
memory” menu.
stick mode
“MODE 2” (Throttle at left stick)
“MODE 3” (Throttle at right stick) “MODE 4” (Throttle at left stick)
“MODE 1” (Throttle at right stick)
elev. down
elev. up
left rudder
right rudder
full throttle
idle
left aileron
right aileron
full throttle
left rudder
right rudder
idle
elev. down
elev. up
left aileron
right aileron
elev. down
elev. up
left aileron
right aileron
Motor Vollgas
idle
left rudder
right rudder
full throttle
idle
left aileron
right aileron
elev. down
elev. up
left rudder
right rudder
Basically there are four possible ways of arranging the
principal control functions of a fi xed-wing model on the
two dual-axis sticks: the primary functions are aileron,
elevator, rudder and throttle (or airbrakes). Which of
these options you select depends on your individual
preferences and fl ying style.
Use the arrow buttons cd of the left or right-hand
touch-key to move to the “Stick mode” line. You will see
the Select fi eld framed:
mod name
stick mode
CH8 delay
motor on C1
1
yes
no
tail type normal
GRAUBELE
Briefl y press the SET button to highlight the current stick
mode (black background). Now use the arrow buttons
of the right-hand touch-key to select one of the options
1 to 4.
Simultaneously pressing the cd buttons or the ef
buttons of the right-hand touch-key (CLEAR) returns the
display to stick mode “1”.
Touching the
SET button again disables the select fi eld
once more, so that you can switch lines.
motor on C1
mod name
stick mode
CH8 delay
motor on C1
1
yes
no
tail type normal
GRAUBELE
When you select “motor on C1” using the arrow buttons
cd of the left or right-hand touch-key, you will see the
corresponding input fi eld framed. Touch the central
SET
button of the right-hand touch-key to highlight the cur-
rent setting. Now use the arrow buttons of the right-hand
touch-key to switch between the four possible options:
“idle fr.”: The idle position of the throttle / airbrake
stick (C1) is forward, i. e. away from the pilot.