User's Manual

3
NOTICE
2. SAFETY NOTES
3. FEATURES
All instructions, warranties and other collateral documents are subject to change at the sole
discretion of Graupner/SJ. For up-to-date product literature, visit
http://www.openhobby.com and click on the support tab for this product.
This is a sophisticated hobby product and NOT a toy. It must be operated with caution
and common sense and requires some basic mechanical ability. Failure to operate this product in
a safe and responsible manner could result in injury or damage to the product or other property. This
product is not intended for use by children without direct adult supervision. Do not attempt disas-
sembly, use with incompatible components or augment product in any way without the approval
of Graupner/SJ. This manual contains instructions for safety, operation and maintenance. It is
essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup
or use, in order to operate correctly and avoid damage or serious injury.
1. 5 channels radio control set with Graupner/SJ HoTT 2.4 GHz technology(Hopping Intellective Telemetry)
2. The use of up to 75 channels ensures extreme operating reliability and immunity to external
interference.
3. Real-Time Telemetry analysis.
4. Displaying Telemetry data and programming receiver outputs with the optional Graupner/
SJ Smart-Box and the optional sensors.
5. Future-proof update capability using data interface.
6. Advanced HoTT wireless trainer system makes Teacher and Pupil system more enjoyable and
gives user convenience for the teaching/learning.
7. Simple, ultra-fast binding of transmitter and receiver.
8. Extremely fast re-binding, even at maximum range.
WARNING
Read the ENTIRE instruction manual to become familiar with the features of the
product before operating. Failure to operate the product correctly can result in dam-
age to the product, personal property and cause serious injury.
4. SPECIFICATION
Frequency band
Modulation
Output power
Current drain
Operating voltage
2.4~2.4835GHz
FHSS
100mW
Approx 125mA
3.4V~6V
2.4~2.4835GHz
FHSS
Approx 70mA
3.6V~8.4V
Transmitter mz-10
Receiver GR-12L
This is a sophisticated hobby product and NOT a toy. It must be operated with caution and common
sense and requires some basic mechanical ability. Failure to operate this product in a safe and
responsible manner could result in injury or damage to the product or other property. This product is
not intended for use by children without direct adult supervision. Do not attempt disassembly, use with
incompatible components or augment product in any way without the approval of Graupner/SJ. This
manual contains instructions for safety, operation and maintenance. It is essential to read and follow
all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate
correctly and avoid damage or serious injury.
1. Do not y your model near spectators, parking areas or any other area that could result in injury to
people or damage of property.
2. The radio system is affected by signal environment and the electronic jamming signals can cause
disorientation and loss of control of your aircraft.
3. Since models are hazardous when operated and maintained incorrectly, install and operate a radio
control system correctly and always pilot a model so the model is kept under control in all conditions
4. Ensure that all channels are working in the proper manner.
5. Do not y during adverse weather conditions. Poor visibility can cause disorientation and loss of
control of your aircraft. Strong winds can cause similar problems
6. When working with a model, always power on the transmitter rst and power off the transmitter last.
7. After a model is bound to a transmitter and the model is set up in the transmitter, always bind the
model to the transmitter again to establish failsafe settings.
8. When working with a model, always power on the transmitter rst and power off the transmitter
last.
9. Ensure all batteries are full charged before ying.
10. Only to use the recommended adapter when charging the battery of the transmitter and receiver
11.The transmitter shouldn’t be switched off at any time during ight
12. Perform a range check of the transmitter and the model before ying the model
13. Make sure all control surfaces correctly respond to transmitter controls before ying.
14. Perform the programming setup of the transmitter after removing a power battery from a model
or stopping an engine of a model.
15. Don’t move or touch the transmitter antenna during ight