User's Manual



6. ADJUSTBLE STICK LENGTH

7. ADJUSTBLE STICK TENSION

The control stick is consisted of 2pc of stick levers and it allows you to adjust the control stick’s

length as you want.

1. Hold the lever“B”and turn the lever“A”

counter clockwise The lock will be released.

2. Turn the lever“B”and adjust the control

stick’s length as you want. Turn the lever“A”

clockwise, then the lever“A”and“B”are

interlocked and fixed.

The mz-10 offers adjustable tension on the throttle, aileron, elevator and rudder sticks.

1. Remove the battery cover and battery form the transmitter.

2. Unscrew the six Philips head screws that hold the transmitter’s rear cover and remove the rear

case.

3. Using a Philips screw driver, adjust the stick tension screw for the desired control. Clockwise to

tighten and counter clockwise to loosen.

Lever“B”

Lever“A”

Aileron tension

Rudder tension

Elevator tension

Model 1

Model 2

8. Mode exchange of throttle stick for Mode 1 and Mode 2

Unscrew the transmitter’s rear case and

remove the rear case and disassemble the

tension spring from the centering cam in the

elevator gimbal of mode 1 transmitter with

tweezers

Unscrew the tension spring control bolt in

the elevator gimbal of mode 1 transmitter

Disassemble the centering cam form

the gimbal

Disassemble 2pcs of leaf spring in the

throttle gimbal of mode 1 transmitter

Tension spring

Centering cam