User Manual

Gravity
®
is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
Phone: +49 60 81 · 94 19-0
adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email [e-mail] /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
MA 3D A
TRAVELER 3D ARM FOR MICROPHONESTAND
FEATURES
• Tilt and rotation of joints can be adjusted
• Flexible clamping range from 15 mm to 35 mm
• Various applications due to 3/8” thread
• Easy to handle
DESCRIPTION
The Traveler Series’ 3D Arm
Every bit of weight counts when you’re travelling by plane or truck from one
gig to the next. After all, you can’t always rely on the concert venue having
the right tool available for you when needed.
The Gravity
®
3D Arm MA 3DA can be taken everywhere you go. It’s so light
and space-saving, there’s absolutely no need for you to worry about weight
or storage space.
This tool lets you attach microphones, action cams and mobile phone holders
to your microphone stand, for example, and set them up flexibly. Its fastening
mechanism is quick and easy to assemble. The large clamping range from
15 to 35 mm and the three joints with 360° rotation options allow you to
install it as you like. Simply loosen, adjust and tighten the wing-screws.
Voila - you’re all done!
Gravity
®
has once again delivered a small, useful and reliable product for
you to round off your collection of stands.
Product number GMA3DA
Product type Stands and Tripods
Type Other Stands and Tripods
Material Polyamid synthetic material
Joint adjustment Wing screw
Joint rotation 360˚
Joint tilt 180˚
Arm length max. 400 mm
Suitable for mounting on Microphone stands
Suitable for tube diameter 15 mm - 35 mm
Color Black
Thread 3/8"
Weight 0.304 Kg
SPECIFICATIONS