Instructions

Gravity
®
is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
Phone: +49 60 81 · 94 19-0
adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email [e-mail] /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
MICROPHONE ARM
MS TBA 01
FEATURES
• Boom arm for attachment to desks, tubes, etc.
• Flexible orientation in any position
• Microphone holder can be rotated with one hand in four 90° positions
• Clamp with wide clamping range (15–54 mm)
• Sturdy, light aluminium construction
• Integrated cable guide
• Perfect solution for podcasters, YouTubers, home studio producers & Co.
DESCRIPTION
You’ve got your notes all ready, your guest is seated, the camera is running,
and the DAW is waiting for your input. No matter if you’re joining them at the
table as a podcaster, YouTuber, or musician/producer, there’s nothing worse
than your microphone not staying in place and requiring readjustment at the
last minute. The Gravity
®
MS TBA 01 desk-mounted microphone boom arm is
our answer to you overcoming big and small challenges in your day-to-day
life as a content creator.
The MS TBA 01 is a professional microphone boom arm that can be attached
nearly anywhere using its versatile clamp. The clamp’s very wide clamping
range, which is designed for table edges up to 54 mm in thickness, and the
specially shaped clamping surface, which enables device attachment to
smooth surfaces as well as pipes, makes universal positioning possible.
With its three joints the desk-mounted microphone boom arm can be placed
in pretty much any position you want.
Another special feature that Gravity
®
developed for the microphone holder
mechanism allows you to pull out the entire microphone holder with one hand
and rotate it in 90° increments, even after the microphone has been screwed
in place with the microphone or shock mount. The holder then automatically
snaps back into place. Why is that so special?
Just imagine, you’re sitting at your desk and want to record a video when you
do a last-minute check of your camera. That’s when you discover that the
microphone’s current position is getting in the way of the picture or that it’s
blocking you from seeing your sheet music or notes – simply pull the microphone
towards you, rotate it, and release. Voilà ... you’re all done!
The Gravity
®
MS TBA 01 is made almost entirely of lightweight aluminium; only
the table clamp is made of steel and provides the weight required for securely
attaching the entire structure to the desk. The microphone cable also runs
safely along the arm. It is neatly packed in the integrated cable guide so that
you can quickly exchange the cable when things get a little hectic.
SPECIFICATIONS
Product number GMSTBA01
Product type Stands and Tripods
Type Microphone Stands
Arm material Aluminum
Arm color Black
Max. height 810 mm
Base type Table mount
Base material Steel
Clamping range 15 - 54 mm
Max. load capacity 1.5 kg
Interchangable rings 2 x 25 mm, 3 x 15 mm
Black ring pack included Yes
Weight 0.96 kg