User manual

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [e-mail]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email [e-mail] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled waste disposal. Please dis-
pose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Black powder coating and chrome nish
Foolproof operation
Height and tilt adjustment without set screws
INTRODUCTION
The NS ORC is a rugged orchestra-style music stand designed for ultimate handling
convenience. Height and support tilt adjustment rely on frictional force and do not
require any set screws. All frictive parts are engineered for zero wear. The stand of
powder coated steel features a lightweight aluminium support.
SPECIFICATIONS
Product type: Music stand
Material: steel/aluminium (GNSORC1/L),
steel (GNSORC2/L)
Surface: powder coated, chrome-plated
Colour: black, chrome-plated
Support model: Panel
Support material: aluminium (GNSORC1/L),
steel (GNSORC2/L)
Support surface: powder-coated
Support colour: black
Support width: 500 mm
Support height: 335 mm
Min. height (bottom of support): 640 mm (GNSORC1/2),
655 mm (GNSORC1L/2L)
Max. height (bottom of support): 1200 mm (GNSORC1/2),
1500 mm (GNSORC1L/2L)
Transport length: 1180 mm (GNSORC1/2),
1195 mm (GNSORC1L/2L)
Weight: 2.7 kg (GNSORC1), 2.86 kg (GNSORC1L),
3.5 kg (GNSORC2), 3.66 kg (GNSORC2L)
Black ring set included: yes
GNSORC1(L)/2(L)
Music Stand Orchestra