User Manual

Gravity
®
is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
Phone: +49 60 81 · 94 19-0
adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email [e-mail] /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
RETRACTABLE CROWD
BARRIER CASSETTE
FOR STAND MOUNTING · SA BELT 1 B
FEATURES
• Mountable on any stand with 3/8“ 5/8“ or M10 thread
• Self tightening barrier belt
• Three-sided belt clip for combination with any number of
crowd barrier cassettes
• Locking function when attached to belt clip
• Adapter to 3/8“ and M10 included
DESCRIPTION
Whether you’re an event technician, small event organiser or retailer, the
SA BELT 1 B crowd barrier cassette for stand mounting offers you absolute
flexibility for barriered zones, regulated visitor flow, and highlighting of
walkways.
The Gravity
®
SA BELT 1 B crowd barrier cassette can be extended up to two
meters and is self-tensioning. For the required hold of the belt, the retractable
belt system has a useful locking function, whereby the belt is solidly held
in place.
Any number of barrier cassettes can be combined with each other via the
typical three strap clips.
With the SA BELT 1B, there is no need to buy stands twice and fill up your
storage space unnecessarily, as a 5/8” thread is integrated in the cassette
itself, both at the top and bottom. Simply screw them onto any microphone
or speaker stand with 3/8”, 5/8” or M10 threads.
And to make sure you always have the right adapter at hand, the necessary
adapters are included with this very cleverly conceived barrier belt system.
With the SA BELT 1 B, Gravity
®
offers you a versatile system to signalise short
and long walkways, for entrance control, stage barriers or trade fairs.
Product number GSABELT1B
Product type Stands and Tripod Accessories
Type Locking belt cassette
Cassette Material Plastic and steel
Color Black
Belt Material Nylon
Max belt length 1940 mm
Threaded connector 2 x 5/8" female
Accessories (included) 1 x adapter 5/8" male to M10; 1 x
adapter 5/8" male to 3/8" male
Cassette dimensions LxHxW 100 x 133 x 80 mm
Weight 0.45 kg
SPECIFICATIONS