User manual

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [e-mail]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email [e-mail] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled waste disposal. Please dis-
pose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Solid and durable construction
Heavy duty zinc die-cast base
2-point boom adjustment
Ergonomic handling
Interchangeable colour rings
OPERATION
The MS 4321 B is a premium quality microphone stand with thick walled tubing,
powder coated nish and 169 cm maximum height. The heavy duty round base
made of cast iron is equipped with a rubber bottom to provide acoustic isolation
and protect surfaces.
The boom hub features precision 2-point tilt and position adjustment of the 79 cm
boom arm. For easy height adjustment the MS 4321 B sports a smooth, durable
clutch with threaded handle. The ergonomic knobs and clutch handle are made
from high grade ABS with a so touch, non-slip thermoplastic coating for comfor-
table operation, and the custom designed retainer requires no tools for quick and
secure microphone clip attachment.
A set of black coding rings is included with the MS 4321 B, additional ring packs
are available in a wide array of colors for instant personalization.
SPECIFICATIONS
Product type: Microphone stand
Tube material: steel
Tube colour: black
Tube surface: powder-coated
Min. height: 1030 mm
Max. height: 1690 mm
Transport length: 1000 mm
Height adjustment: yes
Base type: Tripod
Base material: die-cast zinc
Boom model: 2-point adjustment
Boom length: 790 mm
Weight: 3 kg
Black ring set included: yes
GMS4321B
Microphone Stand With Folding Tripod Base
and 2-Point Adjustment Boom