Manual

ManualsBrandsGraymills ManualsAccessories for waterBed Filter Magnetic Seperator OMI

Heavy Duty Coolant Tank /

Bed Filter / Magnetic Separator

Operation and

Maintenance

Instructions

WARNINGS/CAUTIONS

Do not install or operate until you have read all

warnings and instructions and understand the

operation.

• Turn off power to the unit before beginning mainte-

nance on the Graymills Coolant Tank, Bed Filter, or

Magnetic Separator.

• Read and follow all safety instructions supplied with

chemical/coolant being used in your machine tool.

• To avoid damage to the unit, check power source for

proper voltage and phase. Unit comes standard with a

transformer capable of accepting either 230V or 460V,

3 phase power.

• As in all electrical circuits, it is highly recommended

that an electric safety device such as a fusible discon-

nect or circuit breaker be installed in line before unit is

connected.

• Do not use an extension cord to supply bed filter system.

795-90248

GM 4-00

BFCT40 Bed Filter with 35-gallon pump/tank

combination

MS40 Magnetic Separator for BFCT40

BFCT80 Bed Filter with 90-gallon pump/tank

combination

MS80 Magnetic Separator for BFCT80

• Make sure that pump is spinning freely. See

Maintenance instructions.

• Check the rotation of the pump before starting opera-

tion. Rotation should be in a clockwise direction look-

ing down on the motor (match arrow on pump body).

• Ensure that all fittings and connections are properly

tightened.

• It is important that sensitive electronic equipment,

such as:

• personal electronic devices such as pacemakers

• computers

• magnetic media such as credit cards

be kept a safe distance from the Magnetic Separator

when it is in operation.

Never work with equipment you feel may be

unsafe. Contact your Supervisor immediately.

Summary of content (4 pages)

PAGE 1
795-90248 GM 4-00 Heavy Duty Coolant Tank / Bed Filter / Magnetic Separator BFCT40 Bed Filter with 35-gallon pump/tank combination MS40 Magnetic Separator for BFCT40 BFCT80 Bed Filter with 90-gallon pump/tank combination MS80 Magnetic Separator for BFCT80 Operation and Maintenance Instructions WARNINGS/CAUTIONS Do not install or operate until you have read all warnings and instructions and understand the operation.
PAGE 2
SYSTEM FEATURES that moves the filter media along. The Graymills combined Coolant Tank, Bed Filter and (optional) Magnetic Separator are designed to keep your cutting, grinding, drilling and milling machinery operating at peak performance. By filtering out harmful contaminants, coolant life is greatly extended, saving both replacement and labor costs. D Diffuser Tray Collects larger particles before the coolant is deposited on the filter media. Also helps spread deposits evenly, increasing media life.
PAGE 3
as shown in the wiring schematic, Figure 2. All electrical work must be according to applicable codes. 9.Complete any other necessary installations to finish the hook up. This includes attaching hoses and fittings (customer-supplied) from the pump discharge to the machine tool. The 35-gallon BFCT40 system has a 3/8" pump discharge; the 90-gallon BFCT80 system has a 1/2" pump discharge. Do not reduce the outlet of the pump. Doing so will reduce the flow capacity of the pump.
PAGE 4
and roller so that it does not harden and cause a malfunction. Clean away metal chips as necessary. • If the Magnetic Separator will not be used for an extended period of time, loosen the wing nuts to decrease pressure of the scraper on the roller. This will extend roller life. • Empty and clean the unit as necessary. Check the diffuser tray, chain and tank. Wipe out all debris with a rag.