Graymills Corporation – 3705 N. Lincoln Ave. / Chicago, IL 60613 – Phone: 773.477.4100 Fax: 773.477.8673 – www.graymills.com
Model BIO436R-A and BIO536R-A BIOMATIC
Heated Bioremediation Parts Cleaner
Operations and Maintenance Instructions
Be sure anyone operating this unit reads and understands all warnings and instructions. Keep this
manual available for reference/training.
You will find various types of safety information on the following pages and on the labels attached to Graymills equipment. The following
Safety Statements explain their meaning:
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid personal injury or
DANGER indicates a hazardous situation which, if not avoided, will result in death or
WARNING indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if
not avoided, could result in minor or moderate injury.
CAUTION, without the safety alert symbol, is used to address practices not related to
READ BEFORE OPERATING
• Use only Super Biotene
cleaning fluids. Do NOT
use solvents, gasoline, etc., as they will create an
extremely hazardous situation.
• Do NOT contaminate cleaning fluid with any
flammable or combustible material such as gasoline,
alcohol, mineral spirits, etc. Drain parts to be cleaned
of any flammable material or combustible material
before cleaning. Even small quantities can create a
dangerous fire hazard.
• Never work with equipment you feel may be unsafe.
Contact your supervisor immediately if you feel a
piece of equipment is in unsafe condition.
• Cleaning solutions may be irritating to skin and eyes.
Always wear gloves, apron and safety glasses when
using. If splashed in eyes, flush thoroughly with
water and follow directions on cleaning solution
MSDS. See “USE OF INDUSTRIAL CLEANING
SOLUTIONS” on page 2.
• Install machine in a well ventilated area.