Owner's manual

19
Performance Charts
(7.6)
(15.2)
(22.7)
(30.3) (37.9)
(45.4)
(53.0) (60.6)
Fluid Outlet Pressure
Test Conditions: Pump tested in water with inlet submerged.
To find Fluid Outlet Pressure (psi/MPa/bar) at a
specific fluid flow (gpm/lpm) and operating air pressure
(psi/MPa/bar):
1. Locate fluid flow rate along bottom of chart.
2. Follow vertical line up to intersection with selected fluid
outlet pressure curve.
3. Follow left to scale to read fluid outlet pressure.
FLUID FLOW––gpm (lpm)
(0.7, 7)
(0.55, 5.5)
(0.41, 4.1)
(0.28, 2.8)
(0.14, 1.4)
Fluid Pressure Curves
A at 100 psi (0.7 MPa, 7 bar) air pressure
B at 70 psi (0.48 MPa, 4.8 bar) air pressure
C at 40 psi (0.28 MPa, 2.8 bar) air pressure
A
B
C
rab ,aPM( isp – erusserP teltuO diulF
)
(7.6) (15.2)
(22.7)
(30.3) (37.9)
(45.4) (53.0)
(60.6)
Air Consumption
Test Conditions: Pump tested in water with inlet submerged.
FLUID FLOW––gpm (lpm)
B
C
To find Pump Air Consumption (scfm or m#/min)
at a specific fluid flow (gpm/lpm) and air pressure
(psi/MPa/bar):
1. Locate fluid flow rate along bottom of chart.
2. Read vertical line up to intersection with selected
air consumption curve.
3. Follow left to scale to read air consumption.
Air Consumption Curves
A at 100 psi (0.7 MPa, 7 bar) air pressure
B at 70 psi (0.48 MPa, 4.8 bar) air pressure
C at 40 psi (0.28 MPa, 2.8 bar) air pressure
(0.28)
(0.14)
(0.42)
(0.56)
(0.70)
(0.84)
)nim/sretem cibuc( mfcs – noitpmusnoC riA
A
WARRANTY
Graymills Corporation warrants that the equipment manufactured and
delivered, when properly installed and maintained , shall be free from
defects in workmanship and will function as quoted in the published speci-
fication. Graymills does not warrant process performance, nor assume any
liability for equipment selection, adaptation, or installation.
Warranty does not apply to damages or defects caused by shipping, opera-
tor carelessness, mis–use, improper application or installation, abnormal
use, use of add–on parts or equipment which damages or impairs the prop-
er function of the unit and modifications made to the unit. Warranty does
not apply to expendable parts needing replacement periodically due to
normal wear and tear.
A new Warranty period shall not be established for repaired or replaced
materials or products. Such items shall remain under Warranty for only the
remainder of the Warranty period of the original materials or product.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER
WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESSED, IMPLIED
OR STATUTORY. GRAYMILLS CORPORATION MAKES NO OTH-
ER WARRANTY OF ANY KIND EXPRESS OR IMPLIED. ALL IM-
PLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE A
FORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY GRAY-
MILLS CORPORATION AND EXCLUDED FROM THIS SALE.
Graymills warranty obligations and Buyer remedies (except to title) are
solely and exclusively stated herein. In no case will Graymills be liable
for consequential damages, loss of production, or any other loss incurred
due to interruption of service.
Graymills’ obligation under this Warranty shall be limited to:
a) Repairing or replacing (at Graymills sole discretion) any non–con-
forming or defective component within one year from the date of
shipment from Graymills.
b) Repairing or replacing (at Graymills sole discretion), components
supplied by, but not manufactured by Graymills, to the extent of the
warranty given by the original manufacturer.
Buyer must give Graymills prompt notice of any defect or failure.
If you believe that you have a Warranty claim, contact Graymills at
(773)248–6825. Any return material must have an RMA number on the
outside of the package and must be shipped prepaid or shipment will be
refused. Graymills will promptly examine the material and determine if it
is defective and within the Warranty period.
Graymills Corporation 3705 N. Lincoln Avenue Chicago, Illinois 60613 773/248–6825 FAX [phone] www.graymills.com