Installation Sheet

1 Disconnect power. Use voltmeter to verify that there is no voltage present on the
switch wire. Tip: Hang a card in the fuse box so no one accidentally turns on the power.
Concrete ceiling: Use a masonry drill to make a 6mm hole in the ceiling. Push a
universal plug (6 mm) in the hole. Turn screw hook into the plug.
Drywall ceiling: Drill a hole of 8 mm. Push a collapsed hollow wall plug into the hole.
Turn screw hook into the plug.
For all ceilings: Check with a cable locator if there are no power lines running through
the place where you want to drill. Otherwise there can be a risk of short circuits.Think
about your safety!
Roest products are naturally rusted and although they are thoroughly treated, Roest
lighting can be scratched by sharp objects, leaving an orange marking. When this
occurs, polish the scratch with Linseed oil and a cloth.
Roest products are naturally rusted and although they are thoroughly treated, Roest
lighting can leave staines when it is rubbed against other materials like fabrics, wood
and paper.
10W
MAX LED
GU10
Karven.com
220V
240V
-
50Hz
60Hz
-
1 2 3 4 5
6 7 8 9
10
Neutral
Live
= Not included!
Ground

Summary of content (1 pages)