- Chariot Chariot / Chariot LX Operator's Manual

Service Mower - 41

SERVICE MOWER

Service Mower

Removing and Installing Mower Deck Foot

Plate

Removing Foot Plate

1. Park machine safely. (See Parking Safely in the Safety

section.)

MX15314

2. Raise foot plate (A) using hole (B).

MX15315

3. Remove and retain hardware (C) securing foot plate (A)

on both sides of machine.

4. Remove foot plate.

Installing Foot Plate

1. Install foot plate (A) using hardware (C) saved earlier.

2. Lower foot plate.

Removing and Installing Mower Deck Belt

Shields

Removing Belt Shields

1. Park machine safely. (See Parking Safely in the Safety

section.)

2. Lower mower deck to the lowest cutting height position.

NOTE: Two retaining knobs are used on each cover on

the 72-inch mower deck.

MX15302

Picture Note: 48-, 52- and 61-inch mower deck belt

shield.

MX15303

Picture Note: 72-inch mower deck belt shield.

3. Remove knob(s) (A).

4. Remove belt shield (B).

Installing Belt Shields

1. Install belt shield (B).

2. Install knob(s) (A).

c CAUTION: Avoid injury! Help prevent serious

personal injury. Do not operate the mower

without the foot plate installed.

c CAUTION: Avoid injury! Help prevent serious

personal injury. Do not operate the mower

without the belt shields installed.