Instructions / Assembly

ManualsBrandsGreat Day ManualsTools & HardwarePowerloader ATV or UTV Winch Powered Big Game and Cargo Lifter

PAGE 1 OF 5

The PowerLoader

MODEL PL250

READ ALL INSTRUCTIONS BEFORE USING THE POWERLOADER

NOTE: Failure to read instructions before use could result in injury or death.

CONTENTS

Fig. 1

CONTENTS:

1 – PowerLoader

2 - Mounting brackets

4 – 1/4” U-Bolts w/ brackets

16 - Metal Washers

8 - Lock nuts

4 – 1/4” X 2 1/2” Bolts

4 -Thick Nylon Spacers*

2 - Load-securing straps

4 – 1/4” Wing knobs

*NOTE: The 4 nylon spacers may be used to make

minor adjustments to better fit the Power Loader to

the ATV/UTV front rack. (See Fig. 1) for mounting

brackets and PowerLoader frame.

Summary of content (5 pages)

PAGE 1
PAGE 1 OF 5 The PowerLoader MODEL PL250 READ ALL INSTRUCTIONS BEFORE USING THE POWERLOADER NOTE: Failure to read instructions before use could result in injury or death. CONTENTS: 1 – PowerLoader 2 - Mounting brackets 4 – 1/4” U-Bolts w/ brackets 16 - Metal Washers 8 - Lock nuts 4 – 1/4” X 2 1/2” Bolts 4 -Thick Nylon Spacers* 2 - Load-securing straps 4 – 1/4” Wing knobs CONTENTS *NOTE: The 4 nylon spacers may be used to make minor adjustments to better fit the Power Loader to the ATV/UTV front rack.
PAGE 2
PAGE 2 OF 5 INSTRUCTIONS FOR INSTALLATION AND USE STEP 1: Find a clean flat surface to work on and assemble the mounting brackets to the PowerLoader. A. Remove the two 2” Quick Clip pins and fold the Power Loader out. This will allow attachment of mounting brackets to the vertical brace on the Power Loader. (See Fig. 2) Fig. 2 A. Start with the left mounting bracket and attach it to the left vertical brace of the Power Loader facing the angle to the outside of the vertical brace. (See Fig.
PAGE 3
PAGE 3 OF 5 Fig. 4a Fig. 4b STEP 2: To load a deer, hay, firewood or other objects, position the ATV about two feet from the object to be loaded. Next, set the brakes of the ATV. Then go to the front of the ATV and remove both 3” Quick Clip pins from the Power Loader (See Fig. 5). Next, remove both 2” Quick Clip pins. Now pull out on the Power Loader cargo platform until it is fully extended and lower the platform to the ground (See Fig. 6). Fig. 5 Fig.
PAGE 4
PAGE 4 OF 5 STEP 3: First, reel out enough winch cable to pass over both of the fairlead rollers. Bring the winch cable down to the hook buckle and attach cable (See Fig. 8). Fig. 8 A. Then begin to reel in the winch cable. When the cargo platform telescopes in fully and is parallel to the ground, replace the two 3” Quick Clip pins (See Fig. 9). Fig. 9 A. Next, continue to reel in the winch cable until the load is nearly in the upright position (See Fig. 10).
PAGE 5
PAGE 5 OF 5 WARNING: Always load the PowerLoader on level ground. WARNING: When transporting a load with the PowerLoader, never exceed 5 MPH ATV/UTV speed. WARNING: Must be 16 years old or older to use this product. WARNING: Keep hands away from PowerLoader while loading or unloading. WARNING: Do not descend or ascend steep inclines while transporting a load. WARNING: Do not travel when the PowerLoader is loaded and extended. WARNING: Use on 4X4 ATVs or UTVs only.