Instructions / Assembly

“QUICK DRAW”
Overhead Gun Rack
Model: QD853OGR
Attach gun clips to mounting bar using ¼” x 1-
3/4” bolts, flat washers, and locknuts (Fig.1)
NOTE: There are two set of holes in 853
mounting bar. Choose holes that best
accommodate guns. Fig. 1
Slide threaded adjustment rod into open end of mounting bar. Place gun rack between front and
rear roll bar and slide adjustment bar out until gun rack is extended between roll bars. Tighten
nuts on adjustment rod against mounting bar until 853 gun rack is securely held between roll
bars.
For more information about this or other products, contact us at:
Great Day, Inc.
604 Kimbrough Dr. * Tallulah, LA 71282 * [phone] * www.greatdayinc.com
Contents:
1ea. 853 Mounting Bar
1ea. All Thread Adjustment Rod
2ea. Gun Clip Sets
2ea. ¼” x 1-3/4” Bolts
2ea. ¼” Locknuts
4a. Flat washers