Instructions / Assembly

ManualsBrandsGreat Day ManualsTools & HardwareTruck N Buddy Magnum

PAGE 1 OF 4

MAGNUM TRUCK N’ BUDDY

MODEL: TNB3000MB

READ ALL INSTRUCTIONS BEFORE USING THE MAGNUM TRUCK N’ BUDDY

NOTE: Failure to read instructions before use could result in injury or death.

Instructions for Installation and Use:

FIG. 1

FIG. 2

PAGE 2 OF 4

CONTENTS-SEE FIGURE 1

15- 1/4” X 1 1/2” MACHINE SCREWS

2- GRAB RAILS

4- 1/4” X 1 3/4” BOLTS

4- FLAT WASHERS

4- LOCK NUTS

1- MAGNUM TRUCK N’ BUDDY

FRAME WITH CABLES & BUNGIE

CORD

STEP 1-SEE FIGURE 2

SELECT DESIRED LOCATION ON

TAILGATE OF TRUCK MAKING SURE

THE BOTTOM STABILIZING ANGLE

IS FLUSH AGAINST THE TOP OF

TAILGATE. MARK SELECTED HOLES

WITH PENCIL OR MARKER BEFORE

DRILLING.

**NOTE** A MINIMUM OF 15

MACHINE SCREWS SHOULD BE

USED FOR SECURE MOUNTING.

Summary of content (4 pages)

PAGE 1
PAGE 1 OF 4 MAGNUM TRUCK N’ BUDDY MODEL: TNB3000MB READ ALL INSTRUCTIONS BEFORE USING THE MAGNUM TRUCK N’ BUDDY NOTE: Failure to read instructions before use could result in injury or death. Instructions for Installation and Use: CONTENTS-SEE FIGURE 1 15- 1/4” X 1 1/2” MACHINE SCREWS 2- GRAB RAILS 4- 1/4” X 1 3/4” BOLTS 4- FLAT WASHERS 4- LOCK NUTS 1- MAGNUM TRUCK N’ BUDDY FRAME WITH CABLES & BUNGIE CORD FIG.
PAGE 2
STEP 2-SEE FIGURE 3 REMOVE MAGNUM TRUCK N’ BUDDY AND DRILL PILOT HOLES WHERE MARKED USING A 1/8” DRILL BIT. FIG. 3 STEP 3-SEE FIGURE 4 REPLACE MAGNUM TRUCK N’ BUDDY OVER DRILLED HOLES AND FASTEN TO TAILGATE USING THE 15 MACHINE SCREWS PROVIDED. FIG. 4 STEP 4-SEE FIGURE 5 ATTACH GRIP RAILS TO EACH SIDE OF MAGNUM TRUCK N’ BUDDY USING 4 1/4” X 1 3/4” BOLTS, FLAT WASHERS AND LOCKNUTS. (2 EACH PER GRIP RAIL) FIG.
PAGE 3
PAGE 3 OF 4 STEP 6-SEE FIGURE 8 REVERSE THIS PROCEDURE TO RETURN THE MAGNUM TRUCK N’ BUDDY TO ITS COMPACT TRAVELING POSITION. FIG. 8 FIG. 9 FIGURE 9 SHOWS THE MAGNUM TRUCK N’ BUDDY SECURED AND IN TRAVELING POSITION FROM INSIDE THE TRUCK BED.  NEVER EXCEED THE OVERALL DISTRIBUTED WEIGHT CAPACITY OF 400 LBS. ON THE MAGNUM TRUCK N’ BUDDY.   THE MAGNUM TRUCK N’ BUDDY SHOULD ALWAYS BE IN THE FOLDED AND SECURED POSITION WHILE VEHICLE IS IN MOTION.
PAGE 4
PAGE 4 OF 4 TRUCK N’ BUDDY™ (Patent Pending) Failure to read and follow the warnings below could result in serious injury or death. 1. Do Not use the Truck N’ Buddy™ at any time if you have consumed alcohol or drugs (prescription or otherwise) that may affect your balance. 2. Do Not use the Truck N’ Buddy™ at any time if you have any medical condition that affects your balance. 3.