Instructions / Assembly

MAGNUM TRUCK N’ BUDDY

MODEL: TNB3000MB OR TNB3000MC

READ ALL INSTRUCTIONS BEFORE USING THE MAGNUM TRUCK N’ BUDDY

NOTE: Failure to read instructions before use could result in injury or death.

Instructions for Installation and Use:

FIG. 1

FIG. 2

CONTENTS-SEE FIGURE 1

1- MAGNUM TRUCK N’ BUDDY FRAME

WITH CABLES & BUNGIE CORD

15- 1/4” X 1 1/2” MACHINE SCREWS

2- GRAB RAILS

4- 1/4” X 1 3/4” BOLTS

4- FLAT WASHERS

4- LOCK NUTS

STEP 1-SEE FIGURE 2

SELECT DESIRED LOCATION

ON TAILGATE OF TRUCK

MAKING SURE THE BOTTOM

STABILIZING ANGLE IS

FLUSH AGAINST THE TOP OF

TAILGATE. MARK SELECTED

HOLES WITH PENCIL OR

MARKER BEFORE DRILLING.

**NOTE** A MINIMUM OF 15

MACHINE SCREWS SHOULD

BE USED FOR SECURE

MOUNTING.

PAGE 1
MAGNUM TRUCK N’ BUDDY MODEL: TNB3000MB OR TNB3000MC READ ALL INSTRUCTIONS BEFORE USING THE MAGNUM TRUCK N’ BUDDY NOTE: Failure to read instructions before use could result in injury or death. Instructions for Installation and Use: CONTENTS-SEE FIGURE 1 1- MAGNUM TRUCK N’ BUDDY FRAME WITH CABLES & BUNGIE CORD 15- 1/4” X 1 1/2” MACHINE SCREWS 2- GRAB RAILS 4- 1/4” X 1 3/4” BOLTS 4- FLAT WASHERS 4- LOCK NUTS FIG.
PAGE 2
STEP 2-SEE FIGURE 3 REMOVE MAGNUM TRUCK N’ BUDDY AND DRILL PILOT HOLES WHERE MARKED USING A 1/8” DRILL BIT. FIG. 3 STEP 3-SEE FIGURE 4 REPLACE MAGNUM TRUCK N’ BUDDY OVER DRILLED HOLES AND FASTEN TO TAILGATE USING THE 15 MACHINE SCREWS PROVIDED. FIG. 4 STEP 4-SEE FIGURE 5 ATTACH GRIP RAILS TO EACH SIDE OF MAGNUM TRUCK N’ BUDDY USING 4 - 1/4” X 1 3/4” BOLTS, FLAT WASHERS AND LOCKNUTS. (2 EACH PER GRIP RAIL) FIG.
PAGE 3
STEP 6-SEE FIGURE 8 REVERSE THIS PROCEDURE TO RETURN THE MAGNUM TRUCK N’ BUDDY TO ITS COMPACT TRAVELING POSITION. FIG. 8 FIG. 9 FIGURE 9 SHOWS THE MAGNUM TRUCK N’ BUDDY SECURED AND IN TRAVELING POSITION FROM INSIDE THE TRUCK BED. NEVER EXCEED THE OVERALL DISTRIBUTED WEIGHT CAPACITY OF 400 LBS. ON THE MAGNUM TRUCK N’ BUDDY THE MAGNUM TRUCK N’ BUDDY SHOULD ALWAYS BE IN THE FOLDED AND SECURED POSITION WHILE VEHICLE IS IN MOTION.