FAQ

Do I need to install regular acoustic panels behind the lay-in
panels?
No, that is not necessary. If sag or lift is an issue, we recommend that the panels are installed underneath a
mineral board ceiling tile or some other material. You can use old mineral board tiles or purchase an
economical mineral board tile for this purpose. THIS IS NOT A REQUIREMENT.
Can I paint the panels?
Yes the matte white and unfinished panels are recommended if you plan on painting your tiles. Use an oil-
based primer and paint. Steel will rust if a water-based product is used.
What is the heat index for these tiles?
Painted tiles are fire retardant up to 300 degrees.
Which tin tiles need a border tile?
The Syracuse, Saginaw, Niagara, Toledo, Rochester, and Toronto designs typically use a border tile, but the
use of border tiles is based on personal preference.
What grid system can be used for lay-in tiles?
Any standard grid system can be used and grids can be painted to match the tiles. Some GridMAX is similar in
color, but none is an exact match.
How should the nail-up tiles be installed?
Plywood or furring strip installation is recommended prior to nailing up tiles. Space the nails every 6-12 inches
apart. See our installation page for details.