Technical Specifications

Table Of Contents

TRAVERSE SERIES COLLECTION

PRODUCT SPECIFICATIONS

Product Thickness: 6.0mm

Product Width: 7”

Product Length: 48”

Wear Layer Thickness: 20 Mil

Finish over Wear Layer: UV Coating

Planks per Carton: 6

Square Feet per Carton: 14.02 sq.ft.

Surface: Cut & Painted Beveled Edge

Scratch Resistant: Yes

Stain Resistant: Yes

Ortho Phthalates: This product is Ortho Phthalate free

INSTALLATION

Use: Residential and Commercial Rated

Installation Method: Click

Location: Can be Installed On, or Above or Below Ground Level

SPECIAL FEATURES

Durable construction

Waterproof

No need for underlayment or vapor barrier

Superior Dimensional Stability -20° to +140°

PAGE 1
TRAVERSE SERIES COLLECTION PRODUCT SPECIFICATIONS Product Thickness: 6.0mm Product Width: 7” Product Length: 48” Wear Layer Thickness: 20 Mil Finish over Wear Layer: UV Coating Planks per Carton: 6 Square Feet per Carton: 14.02 sq.ft.
PAGE 2
CLEANING AND MAINTENANCE Daily Maintenance: • Vacuum your floors instead of sweeping • Vacuum your floors as part of a regular weekly routine, as well as after any event that has left dirt behind. Gravel and dirt of any kind have the potential to damage the floor if not removed properly and promptly. Vacuuming, with a floor attachment rather than a beater bar, is preferred to sweeping because it not only addresses the surface of the floor but pulls particulates from between the planks.
PAGE 3
Preventative Maintenance Continued: • Use NON-RUBBER backed mats that are labeled “colorfast” by the manufacturer. Non-staining, vinyl-backed mats or woven rugs should be used at all entrances to prevent dirt and grit from being tracked onto your floor. • Use protective mats beneath rolling chairs and keep furniture casters clean. We recommend the use of a hard surface (nonstudded), non-rubber chair mat to protect your floor from office chairs with casters.