Owner’s Manual ROTARY TOOL 80134 3 General Safety Rules CAUTION: Before using this rotary tool or any of its accessories, read this manual and follow all its Safety Rules and Operating Instructions.
TABLE OF CONTENTS SECTION Warranty ….………………………. Product specifications …………... Power tool safety ………………… Rotary tool safety .……………….. Symbols ………………………….. Know your rotary tool …………… PAGE 2 2 3–4 4–5 5 6 SECTION Accessories …………………… Carton contents ……..………... Accessory description & use .. Assembly & operation ..……… Maintenance …….…………….. Parts & service ..……..………..
POWER TOOL SAFETY from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. GENERAL SAFETY RULES ! WARNING Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. When operating a power tool outside, use an outdoor extension cord marked “W -A” or “W”.
POWER TOOL SAFETY ROTARY TOOL SAFETY TOOL USE AND CARE SERVICE Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Tool service must be performed only by qualified personnel. Service or maintenance performed by unqualified personnel could result in risk of injury. For more details, call 1-866-458-2472. Do not force the tool. Use the correct tool for your application.
ROTARY TOOL SAFETY SPECIFIC SAFETY RULES – cont’d Never use dull or damaged bits. Sharp bits must be handled with care. Damaged bits can snap during use. Dull bits require more force to push the tool, possibly causing the bit to break. Always use the correct collet size. If the collet size is larger than the accessory shank size it will not grip the shank properly, leading to possible injury to the operator or damage to the tool. Never touch the bit during or immediately after use.
KNOW YOUR ROTARY TOOL Hanging loop Variable speed control dial 3 Brush cap Spindle lock button ON/OFF switch Umbrella nut Collet nut 6
ACCESSORIES & CARTON CONTENTS AVAILABLE ACCESSORIES ! WARNING ! WARNING To avoid fire or toxic reaction, never use gasoline, naphtha, acetone, lacquer thinner or similar highly volatile solvents to clean the tool. Use only accessories recommended for this rotary tool. Follow instructions that accompany accessories. Use of improper accessories may cause injury to the operator or damage to the rotary tool.
CARTON CONTENTS C 3 A B 8
ACCESSORY KIT CONTENTS Illustration Description Aluminum oxide grinding stone Aluminum oxide grinding stone Aluminum oxide grinding stone Aluminum oxide grinding stone Aluminum oxide grinding stone Felt polishing wheel Felt polishing wheel Shape Qty Cylinder 3/8” 1 Cone 5/8” 1 Parabolic 3/8” 1 Cylinder 13/32” 1 Cylinder 25/32” 1 1/2” 2 1” 2 Mandrel 1/8” for felt polishing wheels 1 Bristle brush 3/4” radial 1 Sanding band 1/2” 60-grit 3 Drum sander 1/2” with 1/8” shank 1 Sanding
ACCESSORY DESCRIPTION & USE Accessory Description Aluminum oxide ?? Grinding stones ?? Grinding wheels ?? Abrasive wheels Cut-off wheel Polishing wheel ?? Felt & cloth Bristle brush Sanding band Sanding wheel Screw mandrel Mandrel for cloth wheel Collet Collet wrench Dressing stone Accessory Use Use on metals, castings, welded joints, rivets and rust. Ideal for sharpening, de-burring, rust removal and general-purpose grinding of most materials.
ASSEMBLY & OPERATION CHANGING THE COLLET (see Fig. 3) INSTALLING ACCESSORIES (see Fig.4) Some accessories require the use of different sized collets. Collet sizes can be 1/16”, 3/32” and 1/8”. It is important to ensure that the collet size matches the accessory. NOTE: This tool includes two of the most commonly used collets: 3/32” and 1/8”. 1. Turn the switch OFF and disconnect the tool from the power source. 2.
OPERATION & MAINTENANCE OPERATION MAINTENANCE GENERAL ! WARNING ! WARNING Have you read “POWER TOOL SAFETY” and “ROTARY TOOL SAFETY” on pages 3, 4 and 5 of this manual? If not, please do it now before you operate this rotary tool. Your safety depends on it! When servicing, use only identical GreatNeck® parts. Use of any other part may create a hazard or cause product damage. DO NOT use solvents when cleaning plastic parts.
21 20 19 18 1 17 16 2 15 14 13 12 10 11 23 3 9 22 13 4 8 24 5 7 25 26 6 27 PARTS DIAGRAM
PARTS LIST ! WARNING When servicing, use only GreatNeck® replacement parts. Use of any other parts may create a HAZARD or cause damage to your rotary tool. Any attempt to repair or replace electrical parts on this rotary tool may create a hazard unless repair is performed by aqualified technician. For more information, call 1-866-458-2472. Always order by PART NUMBER, not by key number.
