Use and Care Manual

OPERATING PROCEDURES

Please consult the Electrical Specifications section on page 5 of this manual before operating.

Initial Setup

:After unpacking your machine

1. Wipe the pan and floss head with a clean, soft cloth moistened with water. Dry

thoroughly. IMPORTANT! Before any cleaning or maintenance, be sure that your

unit’s Power Switch is OFF and the machine is UNPLUGGED.

2. If you are using the machine without a cart, make sure that you have chosen a safe

location for operation and that you place it on a stable, sturdy surface. This machine

operates at high speeds. STABILITY IS ESSENTIAL FOR SAFETY.

3. Be sure that your electrical supply matches the requirements of this machine and that a

properly grounded outlet is available. NEVER TAMPER OR MODIFY THE GROUNDING

PIN OR CORD. Avoid the use of extension cords and 3-prong adapters.

4. Thoroughly familiarize yourself with this manual, all machine components and the safety

precautions before operating. Assemble your cotton candy machine securely by

checking to be sure that the pan is locked into place using the clamping brackets (Step 5,

below). Ensure that your machine is plugged into a dedicated, grounded outlet and that

you are not wearing any loose jewelry, clothing, etc. (see page 3 for further

precautions).

5. To attach the floss pan to the motor body assembly, first place the cleaned pan over the

floss head as shown in Figure J. Next, align the brackets on the bottom of the pan with the

bracket clamps as shown in Figure K. Finally, hook the metal rings of the clamps over the

lips of the brackets and close the clamps into place securely. Repeat for the other side of

the machine, securely fastening all four clamps and brackets.