Owner's manual

7/31/2002
204-328M
9
Maintenance and Lubrication
Maintenance
Proper servicing and adjustment is the key to the
long life of any farm implement. With careful and
systematic inspection, you can avoid costly mainte-
nance, time and repair.
After using your Conservation Coulter and Spring
Package for several hours, check all bolts to be sure
they are tight.
1. Listed below are the items you need to lubricate
every 20 hours of operation. Use a heavy duty
multipurpose grease:
Storage
Clean the Conservation Coulter and Spring Pack-
age as necessary.
1. Lubricate zerks as indicated in the following Il-
lustrations.
2. For longer Conservation Coulter and Spring
Package life store inside if possible.
Lubrication
Coulter Arm Housing
It is important to keep coulter pivots adequately lu-
bricated. Refer to the illustration for further
information.
Lubrication is required every 20 hours of operation.
The grease zerk is located on the coulter arm hous-
ing. Grease until grease starts to come out.
Type of Lubrication: Heavy Duty Multipurpose
Grease
Maintenance and Lubrication
Seasonally
12208