Manual

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
AUTO SECTION TERMINAL / 9
AUTO SECTION POWER UP
The terminal automatically powers on and off when the ignition switch is
powered on and off. At startup, the screen will indicate that the system is
initializing until a connection is made with GPS and the IntelliAg PDC
controller.
When the power is turned off, an orange LED appears in the upper right
corner for approximately 1 minute while data is saving and disappears after
completing the save.
Figure 7
Initializing
UNDERSTANDING THE FIELD MAP
The Auto Section Control Terminal displays field coverage maps for
real-time viewing of the planting operation without interruption of application
rate and seed monitoring information. The full-color display identifies
path-driven outlines, external boundaries, areas planted, and areas left to
plant.
PATH-DRIVEN OUTLINE
The outline of a field can be driven to use as a visual aid when planting.
This is not considered an external boundary so automatic row shutoff will
not occur when driving past the outline.
Figure 8
Path-Driven Field Outline Map
Auto
Initializing....
Please Wait
1 Path-driven field outline
2 Seeded area
3 Nonseeded area
4 Over applied area
1
2
3
4