Manual

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
INTELLIAG PDC SETUP / 17
PHYSICAL CHECK
The Physical Check screen visually displays the implement layout and
control channel center as entered on the Physical Layout screen. Use this
screen to verify channels are setup correctly.
To view Physical Check screen:
1. At the Physical Layout screen, press the Physical Check button.
(Figure 18) depicts channel 1 setup in a correct format.
Figure 18
Physical Check Screen Setup Correct (Example Only)
(Figure 19) depicts an incorrect Y channel setup:
1. Y coordinate for channel 1 entered incorrectly.
2. Control channel graphic (gray box) shows that channel 1 and 2 are not
aligned correctly and are overlapping.
3. Physical check screen provides another visual of actual control
channel center for channel 1 that is incorrectly aligned and overlapping
channel 2.
Figure 19
Physical Check Screen Setup Incorrect
Channel 1 center
(1)
(2)
(3)
OVERLAP