Manual

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
SYSTEM OPERATION / 37
SYSTEM OPERATION
AUTO SECTION MAIN SCREEN
When a task is loaded, the Auto Section Control Main Menu displays on the
IntelliAg virtual terminal and provides a visual representation of implement
section status that can be controlled from this screen.
NOTE: Pressing a section indicator
button represents what action
will occur when pressed, not
the current action.
Figure 37
Auto Section Control Main Screen Functions
MAIN SCREEN FUNCTIONS
1. Implement section bar
Represents the total number of sections controlled by output modules
and gives a visual indicator of which sections are turned on (green)
and off (white)
2. Manual section indicator
Defines a section area to turn on (green) and off (white)
3. Manual section On/Off buttons
Toggles sections within the defined area on or off when pressed
4. Left Section Indicator buttons define all sections in the left group to be
controlled by the left Auto On/Off button when moved. The color of the
left and right indicator identifies the action (on or off) to occur when
section indicators are moved.
5. All sections on/off
Toggles all sections to an on or off state and moves the section
indicators back to the outside of the implement section bar on screen.
6. Manual/Auto mode
Puts system in Auto and Manual mode when pressed
7. Auto Section Control internal storage
Internal storage capacity indicator of imported, created, and stored
fields
All
sections
ON
11
3
4
1
5
6
2
12
Section
Indicator
7
8
9
10