User Manual

Great Plains Mfg., Inc.

10 Electronic Acremeter

194-074M 2014/07/23

Changing the Passcode

To change an existing passcode, ﬁrst enter the existing

password as described in ““Using a Passcode””.

Refer to Figure 10

While still in the P-WORD function display, select a new

passcode using the UP and DOWN buttons.

Press and hold the button until the “SEt” (setting

password) appears in the display. Release the button.

The number in the display is your new password. Be sure

to record it.

To disable the passcode, set the new password to 0000

(press and hold both UP and DOWN to do this quickly).

Press and hold the button until “dIS” (passcode

disabled) appears in the display.

If the passcode is forgotten, it can be disabled by

removing the batteries. In rental or managed commercial

operations, it is recommended that a tamper-evident seal

be afﬁxed to the rear plate of the acre counter (securing

the battery compartment).

Figure 10

Password Change Prompt

34810