User Manual

Great Plains Mfg., Inc.
6 Electronic Acremeter
194-074M 2014/07/23
Width
To correctly calculate acres planted, the acremeter
needs the swath width of the drill.
Note: If a passcode has been set, it must be entered to
adjust WIDTH.
Refer to Figure 7
Press the button until the “WIDTH” LED is lit. The
number displayed is the swath width of your implement in
feet (the span between end row units, plus one row unit
spacing).
To adjust the width, press the UP and DOWN buttons.
The width can be adjusted from .1 to 99.9 feet, in tenths
of a foot.
Model Spacing Width
2S-2600/F/HD/HDF-3210 10 in.
26.7 feet
8.1 meters
2S-2600/F/HD/HDF-4275 7.5 in.
26.3 feet
8.0 meters
2S-2600/F/HD/HDF-5206 6 in.
26.0 feet
7.9 meters
Model Spacing Width
3S-3000/F/HD/HDF-3610 10 in.
30.0 feet
9.1 meters
3S-3000/F/HD/HDF-4875 7.5 in.
30.0 feet
9.1 meters
3S-3000/F/HD/HDF-6006 6 in.
30.0 feet
9.1 meters
Model Spacing Width
3S-4000/F/HD/HDF-4810 10 in.
40.0 feet
12.2 meters
3S-4000/F/HD/HDF-6375 7.5 in.
39.4 feet
12.0 meters
3S-4000/F/HD/HDF-7806 6 in.
39.0 feet
11.9 meters
Model Spacing Width
3S-5000/F/HD/HDF-6010 10 in.
50.0 feet
15.2 meters
3S-5000/F/HD/HDF-8075 7.5 in.
50.0 feet
15.2 meters
3S-5000/F/HD/HDF-1006 6 in.
50.0 feet
15.2 meters
Note: Implement width in “U” mode is USA feet to one
decimal place.
Implement width in “E” mode is in meters to one
decimal place.
Figure 7
Drill Width (Swath)
34779