Operator’s/Parts Manual John Deere & Kinze Seed-Lok™ Planting Components ! Read the operator’s manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! 13243 Cover illustration may show optional equipment not supplied with standard unit.
Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . .1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Using this Manual . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Information . . . . . . . . . . . . . . . . . .3 Owner’s Assistance . . . . . . . . . . . . . . . . . . . . . . . . .4 Operating and Assembly Instructions . . . . . . . . . . .5 General Operation & Repair . . . . . . . . . . . . . . . . .5 Transporting . . . .
General Information 1 General Information Important Notice Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied, while every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc.
2 Introduction Great Plains welcomes you to its growing family of new product owners. This Seed-Lok™ has been designed with care and built by skilled workers using quality materials. Proper setup, maintenance and safe operating practices will help you get years of satisfactory use from the machine. Description of Unit The parts on your Seed-Lok™ have been specially designed and should only be replaced with genuine Great Plains parts.
Important Safety Information 3 Important Safety Information Look for Safety Symbol The SAFETY ALERT SYMBOL indicates there is a potential hazard to personal safety involved and extra safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it.
4 Owner Assistance If you need customer service or repair parts, contact a Great Plains dealer. They have trained personnel, repair parts and equipment specially designed for Great Plains products. Your machine’s parts were specially designed and should only be replaced with Great Plains parts. Always use the model number when ordering parts from your Great Plains dealer.
Operating and Assembly Instructions 5 Operating and Assembly Instructions Most accidents are the result of negligence and carelessness, usually caused by failure of the operator to follow simple but necessary safety precautions. The following safety precautions are suggested to help prevent such accidents. The safe operation of any machinery is a big concern to consumers and manufactures.Your SeedLok™ has been designed with many built-in safety features.
6 Seed-Lok™ Mounting Instructions for John Deere 7200 Planters Consult page 12, Parts Section, for all part (#) references: 1. Lower planter to ground. 2. Remove one gauge wheel (not shown in figures below) by removing the bolt at the wheel’s pivot point. Take note of spacers located on the spindle to ensure the wheel is correctly remounted. If scrapers are currently used, or to ease installation both gauge wheels must be removed. 3. Lift the depth control handle to its highest position. 4.
Operating and Assembly Instructions 7 Seed-Lok™ Mounting Instructions for Kinze and JD 7000 Planters Consult page 10, Parts Section, for all part (#) references: Note: If scraper use is still desired place them between the washer and formed channel before tightening bolts, see Figure 7. 1. Lower planter to ground. 2. Remove gauge wheels and scrapers, see Figure 5. Take note of spacers located on the spindles to ensure the wheel is correctly remounted. 3.
8 Rotary Scraper Seed-Lok™ Mounting Instructions for John Deere 7200 Consult page 12, Parts Section, for all part (#) references: 1. Lower planter to ground. 2. Remove one gauge wheel by removing the bolt at the wheel’s pivot point. Take note of spacers located on the spindle to ensure the wheel is correctly remounted. 3. Lift the depth control handle to its highest position. 4. Insert the edge of the Seed-Lok™ Mount (#3) in the bottom of the opener body. 5.
Adjustments 9 Adjustments Adjustments Storage Consult page 10 or page 12, Parts Section, for all part (#) references: 1. Clean the Seed-Lok™ Wheel as necessary. 2. Store the Seed-Lok™ Wheel inside if possible for longer Seed-Lok™ Wheel life.
10 Tine™ Row Cleaner Parts Seed-Lok™ Wheel Assembly 13242 206-013M 4/13/2009
Parts 11 Ref. Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 802-417C 804-012C 206-015D 803-068C 206-010D 807-125C 206-011D 800-166C 404-061D 804-112C 206-012K 801-078C 804-078C 206-021D 206-014S 817-191C 188-008V 816-173C 801-084C HHCS 3/8-16X7/8 GR5 WASHER FLAT 3/8 SAE PLT SEED LOK MOUNT JD 7000 KZ NUT HEX FLANGE 3/8-16 PLT JD KINZE SEED LOK LOWER MOUNT SPRING EXT 1 X 4 X .
12 John Deere 7200 Seed-Lok™ Assembly 13241 206-013M 4/13/2009
Parts 13 Ref. Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 802-079C 206-009D 206-014D 803-068C 206-010D 807-125C 206-011D 800-166C 404-061D 804-112C 206-012K 801-078C 804-078C 206-021D 206-014S 817-191C 188-008V 816-173C 801-084C HHCS 3/8-16X1 1/4 GR5 ROTARY SCRAPER SPACER SEED LOK MOUNT JD 7200 NUT HEX FLANGE 3/8-16 PLT JD KINZE SEED LOK LOWER MOUNT SPRING EXT 1 X 4 X .135 WD SEED LOK PIVOT PIN SNAP RING 1/2 EXTERNAL HEAVY SEED LOK WHEEL ARM WASHER MACH 1.
14 Appendix Torque Values Chart Bolt Head Identification Bolt Head Identification Bolt Size (Inches) Grade 2 Grade 5 in-tpi1 N · m2 ft-lb3 N·m 1/4" - 20 7.4 5.6 1/4" - 28 8.5 6 Grade 8 Bolt Size (Metric) 5.8 8.8 Class 5.8 10.9 Class 8.8 Class 10.9 ft-lb N·m ft-lb mm x pitch4 11 8 16 12 M 5 X 0.8 4 3 6 5 9 7 13 10 18 14 M6X1 7 5 11 8 15 11 N·m ft-lb N·m ft-lb N·m ft-lb 5/16 - 18 15 11 24 17 33 25 M 8 X 1.
Appendix 15 Warranty Great Plains Manufacturing, Incorporated warrants to the original purchaser that this seeding equipment will be free from defects in material and workmanship for a period of one year from the date of original purchase when used as intended and under normal service and conditions for personal use; 90 days for commercial or rental purposes.
Great Plains Manufacturing, Inc. Corporate Office: P.O.
