Owner manual

4/13/2009

206-013M

Operating and Assembly Instructions

Seed-Lok™ Mounting Instructions

for Kinze and JD 7000 Planters

Consult page 10, Parts Section,

for all part (#) references:

1. Lower planter to ground.

2. Remove gauge wheels and scrapers, see Figure 5.

Take note of spacers located on the spindles to en-

sure the wheel is correctly remounted.

3. Insert Seed-Lok™ mount (#3) from the bottom side

of the opener body and align the holes of the mount

with those of the channel, see Figure 6.

4. Secure the Seed-Lok™ mount by screwing the bolts

and washers (#1), and (#2) through the opener body

and into the flanged nuts (#4).

5. Place the Seed-Lok™ assembly (#11) on the bot-

tom side of the Seed-Lok™ mount (#3) & insert the

1 1/4 carriage bolts & flanged nuts (#21), and (#20)

see Figure 8.

6. Follow the instructions in " Adjustments", on Page 9,

to initially set your Seed-Lok™ Wheels.

7. Reinstall gauge wheels.

Note: If scraper use is still desired place them be-

tween the washer and formed channel before tight-

ening bolts, see Figure 7.

13263

Figure 5 Figure 7

Figure 6 Figure 8