Operator Manual Manual

Great Plains Manufacturing, Inc. Table of Contents Index Appendix B - Initial Setup 103
2014-07-23 Table of Contents Index 401-479M
Refer to Figure 136
13. Use the Left and Right Arrow keys ( or ) to
select the digits to modify. Use the Up or Down
Arrow keys ( or ) to increment or decrement.
Change the row count to the table value for your
planter model and operating configuration.
14. Press the ENTER key to save the correct row
count.
Set Planter Row Spacing
15. Press the Down Arrow key to select the Row
Spacing field .
16. Use the Left and Right Arrow keys ( or ) to
select the digits to modify. Use the Up or Down
Arrow keys ( or ) to increment or decrement.
Change the row spacing to the value for your planter
model (70 cm). Planter swath (“5.60”) is
automatically calculated.
17. Press the ENTER key to save the corrected row
spacing.
Row Setup
The planter row setup defaults to the number of rows
detected (8), and population mode on every row.
Consult the monitor manual for alternative
configurations.
Figure 136
8-Row 70 cm Configuration
34577
a
b
c
b
c