Operator Manual Manual

Great Plains Manufacturing, Inc. Table of Contents Index Introduction 11
2014-07-23 Table of Contents Index 401-479M
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Refer to Figure 2
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial-number plate is
located on the left end of the seed cart tool bar, as
shown.
Record your PD8070 Planter model and serial number
here for quick reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276
1. Discuss the matter with your dealership
service manager. Make sure they are aware
of any problems so they can assist you.
2. If you are still unsatisfied, seek out the owner
or general manager of the dealership.
Figure 2
Serial Number Plate
23054