Operator Manual Manual

401-479M Table of Contents Index 2014-07-23
22 PD8070 Table of Contents Index Great Plains Manufacturing, Inc.
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Pre-Start Checklist
High Pressure Fluid Hazard:
Escaping fluid under pressure can have sufficient pressure to
penetrate the skin. Check all hydraulic lines and fittings before
applying pressure. Fluid escaping from a very small hole can
be almost invisible. Use paper or cardboard, not body parts,
and wear heavy gloves to check for suspected leaks. If injured,
seek immediate medical attention from a physician familiar
with this type of injury.
1. Carefully read “Important Safety Information” on
page 1.
2. Lubricate planter as indicated under “Lubrication
and Scheduled Maintenance” on page 81.
3. Check all tires for proper inflation. See “Tire
Inflation Chart” on page 97.
4. Check all bolts, pins and fasteners. Torque as shown
in “Torque Values Chart” on page 100.
5. Check planter for worn or damaged parts. Repair or
replace parts before going to the field.
6. Check that hoppers are free of dirt and debris. Turn
meter-drive shaft by hand to be sure drive shaft and
seed meter turn freely.