Manual

4 Great Plains Manufacturing, Inc. Front Page Part Lists Press Wheel Mount Update

199-146M Front Page Part Lists 08/19/2010

Install New PW Mount

Refer to Figure 4

7. With press or dead blow hammer insert one bushing

in hole on each side of the press wheel arm .

Install one pivot spacer into each bushing.

890-598C BUSHING 3/4OD X 5/8ID X 1/2

890-524C 20 SER PW ARM PIVOT SPACER

8. Select one new press wheel mount or :

Note: The press wheel assemblies can have either

all long or all short mounts or a combination of the

two.

199-148H 25P LONG PW MOUNT UPDATE

199-149H 25P MID PW MOUNT UPDATE

9. Slide new press wheel mount or into press

wheel arm . Insert 2 new carriage bolts in press

wheel mount (make sure head is on inside of pw

mount with end facing to the outside).

802-030C RHSNB 7/16-14X1 3/4 GR5

Select one each and install on end of each bolt:

804-041C WASHER FLAT 7/16 SAE PLT

804-014C WASHER LOCK 7/16 PLT

803-229C NUT HEX FLANGE LOC 7/16-14

10. Attach the spring on the underside of the press

wheel arm and insert top ring of spring between

the 2 spring alignment bushings .

Attach the spring to the lower holes of the mount

with the clevis pin and spacer bushings .

Secure with cotter pin .

199-113D SPRING ALIGNMENT BUSHING

805-417C PIN CLEVIS 5/8 X 3 49/64 USBL

805-109C PIN COTTER 1/8 X 1 1/4 PLT

11. Reinstall press wheel assembly to opener body

reusing hardware from prior disassembling.

802-091C HHCS 1/2-13X1 1/2 GR5

802-258C HHCS 1/2-13X1 GR5

804-015C WASHER LOCK SPRING 1/2 PLT

405-032D 1X12 PW ADJUSTER

Figure 4

Install New PW Mount Kit

31494

22 3 1

13 14

115

20 12