User Manual

Great Plains Manufacturing, Inc. Table of Contents Index Appendix A - Reference Information 37
2012-08-23 Table of Contents Index 402-382M
402-273K-ASY: 402-273K Installation Details
c/o PART NO DESCRIPTION Page
402-025S LOCK COLLAR, 7/8 HEX W/ SET SC
822-239C PEER 7/8 HEX BRG AND MNT (TYP ROW)
402-025S LOCK COLLAR, 7/8 HEX W/ SET SC
402-273K TRU-COUNT SINGLE ROW ASM 36
802-167C HHCS 1/4-20X1 1/2 GR5
823-328C TRU-COUNT LH AIR CLUTCH 35
TC-68824-01 AIR CYLINDER ASSY
15
26
101
106
230
261
278
U
D
L
R
B
F
261
Figure 36
402-273K-ASY Single-Row LH Clutch Installation Details
32205
101
26
15
Steps:
Install during shaft re-insertion.
Only the shaft secures the clutch to
the opener mount .
An existing bearing is presumed
to be still installed at the left wall of
the opener mount. If it was removed,
re-install it.
1. Add a lock collar ( or ) to
shaft before installing the clutch
only if specified on the clutch
layout drawing for your kit and
kit. Not all rows have collars.
Lock collars, if used, may be
new or saved . Do not
secure set screws until all
clutches are installed and
shaft is in its final position.
2. Loop meter drive chain (not
shown) over shaft before adding
clutch.
3. Install clutch with
anti-rotation bolt facing
forward, and air cylinder up.
Loop chain over sprocket while
installing.
Do not adjust chain slack until
all clutches are installed and
shaft is in its final position.
4. Add a RH lock collar ( or )
if specified.
1
2
26
15 101
101 15
1
261
230
278
1
15
101
230
278
1
2
101
15