User Manual

Great Plains Manufacturing, Inc. Table of Contents Index Appendix A - Reference Information 47
2012-08-23 Table of Contents Index 402-382M
402-329K-ASY: 402-329K Installation Details
101
c/o PART NO DESCRIPTION Page
402-025S LOCK COLLAR, 7/8 HEX W/ SET SC
822-239C PEER 7/8 HEX BRG AND MNT (TYP ROW)
402-025S LOCK COLLAR, 7/8 HEX W/ SET SC
402-329K TRU-COUNT SHORT ROW SINGLE ASM 46
823-327C TRUE COUNT RH AIR CLUTCH 34
TC-68824-01 AIR CYLINDER ASSY
15
26
101
144
260
278
U
D
L
R
B
F
Figure 41
402-329K-ASY Single-Row Short Mount (RH Clutch) Installation Details
32210
26
15
Steps:
This installation presumes that the original bearing
is still in place.
1. Add a lock collar ( or ) to that shaft
before installing the clutch. Do not secure set
screws until all clutches are installed and shaft
is in its final position.
2. Add the clutch assembly to the shaft, with
anti-rotation bolt forward and the cylinder
up. Loop meter chain (not shown) over sprocket
on clutch.
3. Loosen the nuts securing the bearing
flangettes at the bearing support plate.
4. Slide the shaft through the bearing.
5. Add a RH lock collar ( or ) if specified on
the clutch layout drawing.
26
15 101 1
1
260
229 278
26
15 101
1
260
144
101
15
229
278