User Manual

ManualsBrandsGreat Planes ManualsHardware12V 12A Power Supply - GPMP0901

The ElectriFly

™

Power Supply is great for a wide range of applications as it is capable of maintaining 12 amps output current at

12V DC. This power supply delivers clean, smooth, reliable power and is directly compatible with the entire line of ElectriFly Triton

™

chargers, as well as other chargers and a huge variety of other DC devices.

SPECIAL FEATURES

• Delivers up to 12 amps while maintaining a smooth, clean 12 volts DC on the output.

• 4mm banana output jacks for easy connection of chargers and other DC devices.

• Top mounted cooling fan for better overall efﬁ ciency and lifespan.

• Built-in current limiter automatically prevents damage from accidental overloads.

• Includes a convenient face-mounted power switch with LED indicator.

• Durable, lightweight case.

• Short circuit protection.

SPECIFICATIONS

• Input voltage: 110-120V 60Hz, 3-prong U.S. power cord

• DC output voltage: 13.8 volts

• DC output current: 12 amps max.

• Max. rated power: 165W

• Output connections: 4mm banana jacks

• Overload protection: 12 amp solid-state current limiter

• Case size: 5.4" x 4.9" x 2.4" [132 x 125 x 61mm]

• Weight: 29 oz. [822g]

IMPORTANT PRECAUTIONS

• Do not allow water, moisture or foreign objects into the power supply.

• Do not cover the air intake, fan, and other vent holes. This will cause the power supply to overheat.

• Do not exceed 120V AC input.

• Do not leave the power supply connected to AC when unused.

• Do not open or attempt to repair the power supply at any time. Contact Hobby Services for any and all repair needs.

• Keep out of reach of children.

AC INPUT POWER

The ElectriFly 12 Amp Power Supply accepts power from a 110V AC source. This is a “switching” power supply as opposed to a linear

power supply which employs a high frequency switch-mode design to convert 110V AC input to a ﬁ xed 13.8V DC output. This state-

of-the-art technology allows the power supply to operate entirely without a big, heavy internal transformer and results in a very small,

and lightweight device that can deliver a tremendous amount of power. This technology also generates highly efﬁ cient and clean DC

output. This is especially valuable today as many R/C chargers utilize peak detection designs which are very sensitive and demand

the cleanest power sources possible in order to maintain error-free operation.

POWER SWITCH

The power switch has a red LED to clearly show when the switch is in the on position. The LED does not illuminate when the switch

is in the off position. It’s recommended to turn the power supply off when not in use to extend its lifespan.

COOLING FAN

The cooling fan is controlled by a sensor and will switch on and off as needed as heat within the power supply rises and falls. The fan does

not operate at all times when the power switch is turned on.

12 AMP

SWITCHING POWER SUPPLY

™

Summary of content (2 pages)

PAGE 1
2 AMP SWITCHING POWER SUPPLY ™ The ElectriFly™ Power Supply is great for a wide range of applications as it is capable of maintaining 12 amps output current at 12V DC. This power supply delivers clean, smooth, reliable power and is directly compatible with the entire line of ElectriFly Triton™ chargers, as well as other chargers and a huge variety of other DC devices. SPECIAL FEATURES • • • • • • • Delivers up to 12 amps while maintaining a smooth, clean 12 volts DC on the output.
PAGE 2
CASE The case is vented to allow sufficient air-flow for proper cooling. ALWAYS have at least one inch of unobstructed area around the case to allow the fan to properly cool the power supply. WARNING: NEVER set any objects such as nuts, screws, washers, etc. on top of the case because they could very easily fall through the vents and cause permanent damage to the power supply.