Kunai Addendum

Page 9, step 1
The screw-lock connector in the rudder horn illustrated in the instruction manual
is mounted to the wrong side of the horn. Mount the screw-lock connector to the
bottom of the horn as illustrated in this photo.
Page 11, step 4
Before mounting the ESC to the inside of the fuselage with double-sided adhesive
foam tape, test fi t your battery in the fuselage. If the battery fi ts tightly you may omit
the foam tape. Or, if preferred, you may mount the ESC with a few small dabs of Zap
Goo adhesive (PAAR3200) or similar.
INSTRUCTION MANUAL ADDENDUM
Please read this instruction manual addendum before beginning assembly and
replace the steps in the instruction manual with the steps in this addendum.
© 2014 Great Planes Model Mfg. A subsidiary of Hobbico, Inc.
GPMA1815/1816 Addn1
®

Summary of content (1 pages)