Manual

14
ALSO AVAILABLE FROM GREAT PLANES
The Pluma takes foam construction to a new dimension, with a full fuselage that’s more realistic-looking than fl at foamies AND stronger
by design, without carbon reinforcing. With the trim scheme imprinted and all other parts laser-cut and interlocking, the Pluma can be
fl ight-ready in about an hour. Control surfaces are already beveled and hinged with ultra-light 3M
®
Blenderm
®
tape. Even the smallest of
RimFire
™
out-runner brushless motors will effi ciently power the Pluma, and it’s sized right for easy transport to the fi eld or an indoor dome.
GPMA1130
3M
®
and Blenderm
®
are registered trademarks of the Minnesota Mining and Manufacturing Company.
When ElectriFly calls this an “unlimited” foam aerobat,
they’re talking about performance. It’s a great sport model with ¾ throws. Max
‘em, and you’ll fi nd a performance envelope that’s wide open and a mile long. Assembly time averages about 2-3 hours. All control surfaces
are factory-beveled and pre-hinged with proven 3M® Blenderm® tape. Flying surfaces are fi nished and made from Pro-Formance foam.
Total weight is under 7 ounces, and also minimized by carbon-fi ber and laser-cut hardware. As always, less weight = more performance!
GPMA1131
3M
®
and Blenderm
®
are registered trademarks of the Minnesota Mining and Manufacturing Company.
™
Wingspan: 32.5 in (830 mm)
Wing Area: 518 in² (33.4 dm²)
Weight: 8.4–9.5 oz (240-270 g)
Wing Loading: 2.3 - 2.6 oz/ft² (7.2-8.1 g/dm²)
Length: 38 in (955 mm)
Requires: 4-channel radio w/3 micro servos,
out-runner brushless motor,
8A brushless ESC (min)
& 11.1V 300mAh LiPo battery
Wingspan: 32 in (820 mm)
Wing Area: 270 in² (17.4 dm²)
Weight Range: 5.5-6.7 oz (155-190 g)
Wing Loading: 2.9-3.5 oz/ft² (9-11 g/dm²)
Length: 36.5 in (920 mm)
Requires: 4-channel radio w/3 micro servos,
out-runner brushless motor,
8A brushless ESC,
7.4V 300mAh LiPo battery