Bluetooth headset BT-019 User's Manual BT-019 Bluetooth headset
Welcome to use BT-019 1、 Introduction 1.1 Bluetooth introduction 1.2 headset chart 1.3 indicator specification 2、headset basic operation 2.1Bluetooth headset pairing 2.2 Wearing 2.3 How to receive a call 2.4 How to end a call 2.5 How to reject a call 2.6 How to dial a call 2.7 How to redial last call 2.8 Voice transition from mobile phone to headset 2.9 How to open Bluetooth headset 2.10 How to close Bluetooth headset 2.11 How to adjust volume in speaking 2.
Microphone Volume increase key Volume reduction key Transparent light 导光饰片 Multifunction speaking key Earphone interface Charging interface Earphon 1.3 indicator specification Indicator Headset state it flashes blue every 3sec. Headset is in power on state and can not be used now. Blue and red flash alternately Headset is in standby state and waits for connection with mobile phone.
a.Make sure headset is in power-on mode. (Details as 2.9 How to open headset) b.Make sure without other Bluetooth devices in pairing mode within 10m. c.Long press “VOL + and VOL-” about 3sec till BLUE AND RED LED flash alternatively. Loose “VOL + and VOL-”, headset is in waiting mode. d.Choose Bluetooth on the connection type of Bluetooth mobile phone, after entry menu, choose “lookup and search pairing device” (Details as Bluetooth mobile phone specification) e.
2.11 Adjust volume Add volume during speaking, you need press VOL+ lightly; reduce volume during speaking, you need press VOL- lightly. 2.12 Charging battery When you use BT-019 for the first time, please charging over 3hrs till RED LED is put off. During charging, please not to make other application at the same time. When use BT-019 again, charging about 3hrs. Please insert charger to charging port on BT-019. During charging, RED LED will flash.
computer? phone and headset only sends channel in accordance with international Bluetooth standard, so do not worry about disturbing electronic device. How to do if mobile phone has showed connection with headset but without voice on headset? adjust mobile phone to Bluetooth device, close Bluetooth firstly, then open it, delete former searching devices and pairing again.