User's Manual

ManualsBrandsGreat Well Electronic ManualsAudio EquipmentBluetooth Earphone

CL BlueHook User's Manual

1. Introduction

1.1 Bluetooth introduction

1.2 Headset Picture

1.3 indicator specification

2. Operation Instruction

2.1Bluetooth headset pairing

2.2 Wearing

2.3 How to receive a call

2.4 How to end a call

2.5 How to reject a call

2.6 How to dial a call

2.7 How to redial last call

2.8 Voice transition from mobile phone to headset

2.9 How to open Bluetooth headset

2.10 How to close Bluetooth headset

2.11 How to adjust volume in speaking

2.12 How to charge battery of CL BlueHook

3. Specification

4. Appendix

Summary of content (6 pages)

PAGE 1
CL BlueHook User's Manual 1. Introduction 1.1 Bluetooth introduction 1.2 Headset Picture 1.3 indicator specification 2. Operation Instruction 2.1Bluetooth headset pairing 2.2 Wearing 2.3 How to receive a call 2.4 How to end a call 2.5 How to reject a call 2.6 How to dial a call 2.7 How to redial last call 2.8 Voice transition from mobile phone to headset 2.9 How to open Bluetooth headset 2.10 How to close Bluetooth headset 2.11 How to adjust volume in speaking 2.12 How to charge battery of CL BlueHook 3.
PAGE 2
1、 Introduction 1.1 Bluetooth introduction Bluetooth is nickname of king in Denmark in the Dark Ages. Bluetooth technology is ISM frequency working in global common 2.4GHz frequency. It provides low cost, close wireless communication and forms personal network in communication environment of fixed and mobile devices to realize seamless resource sharing for kinds of devices nearby. CL BlueHook is a standard headset in accordance with Bluetooth 2.0+EDR and supports Headset and Headsfree at the same time.
PAGE 3
1.3 indicator specification Indicator Headset state it flashes blue every 3sec. Headset is in power on state and can not be used now. Blue and red flash alternately Headset is in standby state and waits for connection with mobile phone. After blue and red flash alternately, blue light flashes 8 times continuously Connection between headset and mobile phone. it flashes blue every 2sec. Headset is in standby state and can be used. it flashes red slowly. low battery for headset 2.
PAGE 4
trained voice command on mobile phone, it can dial telephone you want. 2．7 Redial the last calling phone Press “VOL -” for 3sec, redial the last telephone number after hearing the voice. Note： a．Mobile phone has not any incoming call and is not in speaking mode. b．The function only works on Bluetooth mobile phone under application mode of handsfree. 2．8 Voice transfer from headset to mobile phone When you need to use mobile phone to make a call, please press VOL+.
PAGE 5
3. Specification Working frequency 2.402GHZ∽2.480GHZ ISM frequency Bluetooth criterion V2.0+EDR RF output power -6∽+6dBm（class2） RF sensitivity superior -75dBm Effective distance maximum without obstacle 10m Working indication 2LED(blue & red) Battery Rechargeable Lithium Polymer Battery DC3.7V Speaking time About 12hrs Standby time About 250hrs Charging time About2∽3hrs Audio output power (RL=32ohm)2.5mw Working temperature -10℃∽+45℃ Storage temperature -20℃∽+65℃ Size 54*25.
PAGE 6
Caution: The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment. Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These Limits are designed to provide reasonable protection against harmful interference in a residential installation.