User's Manual

7
6
Insert the Batteries
Open the battery door in the back of the scale.
Remove insulating strip from beneath the battery (if
fitted) or insert batteries (4 x 1.5V AA) observing the
polarity signs (+ and -) inside the battery compartment.
Close the battery door and wait until the digits
“0.0lb” are shown on the LCD.
CAUTION
When the symbol “ & bAtt ” appears, the device will power off in three seconds. Then you shall replace
with a new set of batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries
with the new one.
Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries.
Install APP
Just simply install the specially-designed APP and pair up your scale with
your mobile or portable equipments. Then you may enjoy the comprehensive health
solution provided by Omada.
Initial Start-Up
With original SENSE ON patent technology, the scale will automatically switch on as you
step on the platform barefooted.
Daily Measurement
Start Measurement
The APP “ Omada ” can be freely downloaded via App Store or Google Play. You
may install it in your smartphone.
Press scale with one foot until a dotted line flashes
on the display. Remove your foot, and wait until you
see “0.0lb”.
Step on the scale with both feet. When you see your weight on the display with two short
“ Beep Beep ” signal, then step off. A dotted line will flash as the scale connects with your
account, and “ SEnt ” will appear with a long “ Beep Beep ” signal when your weight has
been transmitted to your account.
(When sending failure the symbol “ ” appears, and only display your weight data. )