Getting Started Guide

/
TROUBLESHOOTING
Light Decoder
Lights off: Device is in standby mode; insert a test strip to wake the BGM and take a reading.
Three blue lights: Initial connection to Omada was successful.
Three green lights: A measurement was successfully sent to Omada.
First light red: The BGM is disconnected from the Cellular Case. Try reinserting the BGM.
Second light red: The cellular signal is weak or nonexistent. Move the device to a location with a
stronger signal.
Third light red: The reading was not sent.
All three lights red: The batteries are low. Insert three new AAA batteries into the Cellular Case and
two coin cell (3.0 V lithium) batteries into the BGM.